Results 1 to 3 of 3
  1. #1
    Chief "ImaGunna'er" sport454's Avatar
    Join Date
    Mar 2012
    Location
    Double Wells, Arkansas...Just Southwest of Pine Bluff..
    Posts
    6,417

    Vortec type aftermarket head

    This is a good design and price. It is a vortec copy but has some cool changes. One specific change I like is that it has 12 intake mounting holes allowing the use of older intake manifolds.



    http://www.competitionproducts.com/m...nfo/ENQCH350H/

  2. #2
    Senior Member
    Join Date
    Mar 2012
    Posts
    366

    Vortec type aftermarket head

    Also with these heads the casting is a little thicker and u can have them milled down to a 62cc chamber and get around 11:1 with flat top pistons

  3. #3
    Contributing Members Bjames's Avatar
    Join Date
    Mar 2012
    Posts
    333

    Re: Vortec type aftermarket head

    Thats cheap....

    Sent from my MB860 using Tapatalk 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •