|
|
|||||||
| Off road gadgets. Items that new to the market or that just look useful. Post em up, maybe we have not ran across them yet. |
 |
|
|
Thread Tools | Display Modes |
04-23-2010, 12:48 AM
|
#1 |
|
Mark ur Territory
Join Date: Oct 2007
Location: Double Wells, Arkansas
Posts: 4,771
  |
Hey Monkey
__________________
I am having an out-of-money experience. |
|
|
|
04-23-2010, 01:26 AM
|
#2 |
|
Mark ur Territory
Join Date: Oct 2007
Location: Double Wells, Arkansas
Posts: 4,771
|
__________________
I am having an out-of-money experience. |
|
|
|
|
04-23-2010, 01:27 AM
|
#3 |
|
Mud Boggin
Join Date: Oct 2009
Location: Conway, AR
Posts: 351
|
i wonder if i can get much lift out of some new front and rear shackles on my 77, i can make them at work easy... plenty of steel laying around
__________________
77 GMC rcsb 350/th350/np203, 4" Rough Country lift, 12 bolt rear/10 bolt front, 3.73 gears, 35x15.50x15 Super swamper TSL/SX, Spicer hubs, home made bumpers, lunatic driver CHECK OUT MY YOUTUBE CHANNEL
 |
|
|
|
04-23-2010, 01:27 AM
|
#4 |
|
Mark ur Territory
Join Date: Oct 2007
Location: Double Wells, Arkansas
Posts: 4,771
|
__________________
I am having an out-of-money experience. |
|
|
|
|
04-23-2010, 01:35 AM
|
#5 | ||||||||||||||||||||||||||||||||||
|
Mark ur Territory
Join Date: Oct 2007
Location: Double Wells, Arkansas
Posts: 4,771
|
__________________
I am having an out-of-money experience. |
||||||||||||||||||||||||||||||||||
|
|
|
|
04-23-2010, 01:44 AM
|
#6 | |
|
Mark ur Territory
Join Date: Oct 2007
Location: Double Wells, Arkansas
Posts: 4,771
|
Quote:
Yes you could.......be careful how much on the front as it will cause severe handling problems on the front if you change it without shims to get the caster correct or you could have what I refer to as road grader syndrome and that my friend is no fun to drive.
__________________
I am having an out-of-money experience. |
|
|
|
|
|
04-23-2010, 05:30 AM
|
#7 |
|
°lllll°
Join Date: Feb 2008
Location: white hall
Posts: 1,368
|
Still working on the spring packs to see what I'm gonna need. Right now I got a set of main leafs from an s-10, set of main leafs from a dodge 3/4 ton. Trying different combinations with the chevy leafs to get the correct offset to get the wheelbase where I want it. If it works out right I should only need a maximum of a 4 to 5 inch block.
X2 on the longer shackles. My cj has the "road grader" syndrome right now. Drives ok to about 45 mph, then the rollercoaster ride begins. Got some shims ordered to get the caster corrected.
__________________
 Just because it isn't "made", doesn't mean it won't happen |
|
|
|
|
04-24-2010, 12:11 AM
|
#8 |
|
Mark ur Territory
Join Date: Oct 2007
Location: Double Wells, Arkansas
Posts: 4,771
|
Coolness I have a set of ford springs too if you need to measure em...bronco and 2wd pickup type
__________________
I am having an out-of-money experience. |
|
|
|
|
04-24-2010, 09:40 AM
|
#9 |
|
Mud Boggin
Join Date: May 2009
Location: bryant
Posts: 675
|
I have a set of one ton ford. That i took off mine there yours if you need'em
|
|
|
|
|
04-24-2010, 11:50 AM
|
#10 |
|
°lllll°
Join Date: Feb 2008
Location: white hall
Posts: 1,368
|
Thanks everyone. Gonna start mixing parts together to see what I can come up with.
__________________
Just because it isn't "made", doesn't mean it won't happen |
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
